Breadcrumbs

Our Publications

2022

Chandramohan, D. L., Roy, K., Taheri, H., Karpenko, M., Fang, Z., & Lim, J. B. P. (2022). A State of the Art Review of Fillet Welded Joints. Materials, 15(24), 8743. https://doi.org/10.3390/ma15248743

Hasanali, M., Roy, K., Mojtabaei, S. M., Hajirasouliha, I., Clifton, G. C., & Lim, J. B. (2022). A critical review of cold-formed steel seismic resistant systems: Recent developments, challenges and future directions. Thin-Walled Structures, 180, 109953. https://doi.org/10.1016/j.tws.2022.109953

Roy, K., Rezaeian, H., Fang, Z., Raftery, G. M., & Lim, J. B. (2022). Experimental and numerical study of a novel cold-formed steel T-Stub connection subjected to tension force. Journal of Constructional Steel Research, 197, 107466. https://doi.org/10.1016/j.jcsr.2022.107466

Fang, Z., Roy, K., Ingham, J. M., & Lim, J. B. (2022). Assessment of end-two-flange web crippling strength of roll-formed aluminium alloy perforated channels by experimental testing, numerical simulation, and deep learning. Engineering Structures, 268, 114753. https://doi.org/10.1016/j.engstruct.2022.114753

Fang, Z., Roy, K., Dai, Y., & Lim, J. B. (2022). Effect of web perforations on end-two-flange web crippling behaviour of roll-formed aluminium alloy unlipped channels through experimental test, numerical simulation and deep learning. Thin-Walled Structures, 179, 109489. https://doi.org/10.1016/j.tws.2022.109489

Fang, Z., Roy, K., Lakshmanan, D., Pranomrum, P., Li, F., Lau, H. H., & Lim, J. B. (2022). Structural behaviour of back-to-back cold-formed steel channel sections with web openings under axial compression at elevated temperatures. Journal of Building Engineering, 54, 104512. https://doi.org/10.1016/j.jobe.2022.104512

Dai, Y., Roy, K., Fang, Z., Chen, B., Raftery, G. M., & Lim, J. B. (2022). A novel machine learning model to predict the moment capacity of cold-formed steel channel beams with edge-stiffened and un-stiffened web holes. Journal of Building Engineering, 53, 104592. https://doi.org/10.1016/j.jobe.2022.104592

Gurupatham, B. G. A., Roy, K., Raftery, G. M., & Lim, J. B. P. (2022). Influence of Intermediate Stiffeners on Axial Capacity of Thin-Walled Built-Up Open and Closed Channel Section Columns. Buildings, 12(8), 1071. https://doi.org/10.3390/buildings12081071

Fang, Z., Roy, K., Xu, J., Dai, Y., Paul, B., & Lim, J. B. (2022). A novel machine learning method to investigate the web crippling behaviour of perforated roll-formed aluminium alloy unlipped channels under interior-two flange loading. Journal of Building Engineering, 51, 104261. https://doi.org/10.1016/j.jobe.2022.104261

Fang, Z., Roy, K., Chen, B., Xie, Z., Ingham, J., & Lim, J. B. (2022). Effect of the web hole size on the axial capacity of back-to-back aluminium alloy channel section columns. Engineering Structures, 260, 114238. https://doi.org/10.1016/j.engstruct.2022.114238

Milewska, A., Roy, K., Milewski, P., Pham, C. H., Charles Clifton, G., Quenneville, P., & Lim, J. B. (2022). Power-actuated fasteners in single shear-An experimental investigation and proposed design rules. Engineering Structures, 259, 114124. https://doi.org/10.1016/j.engstruct.2022.114124

Aruna, G., Roy, K., Lim, J. B. P., & Suresh Kumar, P. (2022). Cold-Formed Steel Equal Angles with Complex Edge Stiffeners under Axial-Compression Laboratory Testing, Numerical Simulation, and Design. Practice Periodical on Structural Design and Construction, 27(2). https://doi.org/10.1061/(asce)sc.1943-5576.0000678

Fang, Z., Roy, K., Chen, B., Xie, Z., & Lim, J. B. (2022). Local and distortional buckling behaviour of aluminium alloy back-to-back channels with web holes under axial compression. Journal of Building Engineering, 47, 103837. https://doi.org/10.1016/j.jobe.2021.103837

Wu, H., Liang, H., Roy, K., Harrison, E., Fang, Z., De Silva, K., Collins, N., & Lim, J. B. P. (2022). Analyzing the Climate Change Potential of Residential Steel Buildings in New Zealand and Their Alignment in Meeting the 2050 Paris Agreement Targets. Buildings, 12(3), 290. https://doi.org/10.3390/buildings12030290

Hasanali, M., Mojtabaei, S. M., Clifton, G. C., Hajirasouliha, I., Torabian, S., & Lim, J. B. (2022). Capacity and design of cold-formed steel warping-restrained beam-column elements. Journal of Constructional Steel Research, 190, 107139. https://doi.org/10.1016/j.jcsr.2022.107139

Pourmasoud, M. M., Lim, J. B. P., Hajirasouliha, I., & McCrum, D. (2020). Multi-Directional Base Isolation System for Coupled Horizontal and Vertical Seismic Excitations. Journal of Earthquake Engineering, 26(3), 1145–1170. https://doi.org/10.1080/13632469.2020.1713925

Roy, K., Ho Lau, H., Fang, Z., Masood, R., Chui Huon Ting, T., Lim, J. B., & Chieng Chen Lee, V. (2022). Effects of corrosion on the strength of self-drilling screw connections in cold-formed steel structures-experiments and finite element modeling. Structures, 36, 1080–1096. https://doi.org/10.1016/j.istruc.2021.12.052

Roy, K., Chen, B., Fang, Z., Uzzaman, A., & Lim, J. B. P. (2022). Axial Capacity of Back-to-Back Built-Up Aluminum Alloy Channel Section Columns. Journal of Structural Engineering, 148(2). https://doi.org/10.1061/(asce)st.1943-541x.0003238

Chen, B., Roy, K., Fang, Z., Uzzaman, A., Pham, C. H., Raftery, G. M., & Lim, J. B. P. (2022). Shear Capacity of Cold-Formed Steel Channels with Edge-Stiffened Web Holes, Unstiffened Web Holes, and Plain Webs. Journal of Structural Engineering, 148(2). https://doi.org/10.1061/(asce)st.1943-541x.0003250

Fang, Z., Roy, K., Uzzaman, A., & Lim, J. B. (2022). Numerical simulation and proposed design rules of cold-formed stainless steel channels with web holes under interior-one-flange loading. Engineering Structures, 252, 113566. https://doi.org/10.1016/j.engstruct.2021.113566

Ur Rehman, H. S., Raza, M. A., Masood, R., Khan, M. A., Alamgir, S., Javed, M. A., Roy, K., & Lim, J. B. P. (2022). A multi-facet BIM based approach for Green Building design of new multi-family residential building using LEED system. International Journal of Construction Management, 1–15. https://doi.org/10.1080/15623599.2022.2033419

Dani, A. A., Roy, K., Masood, R., Fang, Z., & Lim, J. B. P. (2022). A Comparative Study on the Life Cycle Assessment of New Zealand Residential Buildings. Buildings, 12(1), 50. https://doi.org/10.3390/buildings12010050

Masood, R., Lim, J., González, V., Roy, K., & Khan, K. (2022). A Systematic Review on Supply Chain Management in Prefabricated House-Building Research. Buildings, 12(1), 40. https://doi.org/10.3390/buildings12010040

Roy, K., Su, R., Dani, A. A., Fang, Z., Liang, H., & Lim, J. B. P. (2022). Spatiotemporal Model to Quantify Stocks of Metal Cladding Products for a Prospective Circular Economy. Applied Sciences, 12(9), 4597. https://doi.org/10.3390/app12094597

Liang, H., Roy, K., Fang, Z., & Lim, J. B. P. (2022). A Critical Review on Optimization of Cold-Formed Steel Members for Better Structural and Thermal Performances. Buildings, 12(1), 34. https://doi.org/10.3390/buildings12010034

Jabbari, M., Raftery, G. M., & Lim, J. B. (2022). Environmental durability of epoxy-bonded CFRP-to-steel joints in mode I fracture. International Journal of Adhesion and Adhesives, 112, 103034. https://doi.org/10.1016/j.ijadhadh.2021.103034

2021

Fang, Z., Roy, K., Chi, Y., Chen, B., Lim, J.B.P. (2021), Finite element analysis and proposed design rules for cold-formed stainless steel channels with web holes under end-one-flange loading, Structures, 34, pp. 2876-2899.

Feng, R., Chen, L., Chen, Z., Chen, B., Roy, K., Lim, J.B.P. (2021), Experiments on stainless steel hybrid K-joints with square braces and circular chord, Journal of Constructional Steel Research, 185

Rezaeian, H., Roy, K., Yekrangnia, M., Chen, B., Lim, J.B.P. (2021), Tests, numerical modelling and design of a novel cold-formed steel Tab connection, Journal of Constructional Steel Research, 185

Fang, Z., Roy, K., Ma, Q., Uzzaman, A., Lim, J.B.P. (2021), Application of deep learning method in web crippling strength prediction of cold-formed stainless steel channel sections under end-two-flange loading, Structures, 33, pp. 2903-2942.

Fang, Z., Roy, K., Mares, J., Sham, C.-W., Chen, B., Lim, J.B.P. (2021), Deep learning-based axial capacity prediction for cold-formed steel channel sections using Deep Belief Network, Structures, 33, pp. 2792-2802.

Roy, K., Lau, H.H., Fang, Z., Ahmed, A.M.M., Lim, J.B.P.(2021), Axial capacity of back-to-back built-up cold-formed stainless steel unlipped channels-Numerical investigation and parametric study

Steel and Composite Structures, 40(5), pp. 761-780.

Fang, Z., Roy, K., Chen, B., Sham, C.-W., Hajirasouliha, I., Lim, J.B.P. (2021), Deep learning-based procedure for structural design of cold-formed steel channel sections with edge-stiffened and un-stiffened holes under axial compression, Thin-Walled Structures, 166

Ananthi, G.B.G., Roy, K., Lim, J.B.P. (2021), Tests and Finite Element Modelling of Cold-Formed Steel Zed and Hat Section Columns Under Axial Compression, International Journal of Steel Structures, 21 (4), pp. 1305-1331.

Chen, X., Blum, H.B., Roy, K., Pouladi, P., Uzzaman, A., Lim, J.B.P.(2021), Cold-formed steel portal frame moment-resisting joints: Behaviour, capacity and design, Journal of Constructional Steel Research, 183

Ananthi, G.B.G., Deepak, M.S., Roy, K., Lim, J.B.P. (2021), Influence of intermediate stiffeners on the axial capacity of cold-formed steel back-to-back built-up unequal angle sections, Structures, 32, pp. 827-848.

Feng, R., Chen, L., Chen, Z., Chen, B., Roy, K., Lim, J.B.P. (2021), Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS, Journal of Constructional Steel Research, 183

Chi, Y., Roy, K., Chen, B., Fang, Z., Uzzaman, A., Ananthi, G.B.G., Lim, J.B.P.(2021), Effect of web hole spacing on axial capacity of back-to-back cold-formed steel channels with edge-stiffened holes

Steel and Composite Structures, 40 (2), pp. 287-305.

Roy, K., Chen, B., Fang, Z., Uzzaman, A., Chen, X., Lim, J.B.P. (2021), Local and distortional buckling behaviour of back-to-back built-up aluminium alloy channel section columns, Thin-Walled Structures, 163

Feng, R., Xu, J., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), Numerical investigation and design rules for stress concentration factors of stainless-steel hybrid tubular joints, Thin-Walled Structures, 163

Chen, B., Roy, K., Fang, Z., Uzzaman, A., Chi, Y., Lim, J.B.P. (2021), Web crippling capacity of fastened cold-formed steel channels with edge-stiffened web holes, un-stiffened web holes and plain webs under two-flange loading, Thin-Walled Structures, 163

Chen, B., Roy, K., Fang, Z., Uzzaman, A., Raftery, G., Lim, J.B.P. (2021), Moment capacity of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes, and plain webs, Engineering Structures, 235

Jing, J., Clifton, G.C., Roy, K., Lim, J.B.P. (2021), Seismic protection of modular buildings with galvanised steel wall tracks and bonded rubber units: Experimental and numerical study, Thin-Walled Structures, 162

Feng, R., Tang, C., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), A numerical study and proposed design rules for stress concentration factors of stainless steel hybrid tubular K-joints, Engineering Structures, 233

Feng, R., Wu, C., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), Finite element modelling and proposed design rules of stainless steel hybrid tubular joints with square braces and circular chord, Journal of Constructional Steel Research, 179

Beulah Gnana Ananthi, G., Roy, K., Ahmed, A.M.M., Lim, J.B.P. (2021), Non-linear behaviour and design of web stiffened battened built-up stainless steel channel sections under axial compression, Structures, 30, pp. 477-494.

Roy, K., Ho Lau, H., Ahmed, A.M.M., Lim, J.B.P. (2021), Nonlinear behavior of cold-formed stainless steel built-up box sections under axial compression, Structures, 30, pp. 390-408.

Roy, K., Ting, T.C.H., Lau, H.H., Masood, R., Alyousef, R., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Lim, J.B.P. (2021), Cold-Formed Steel Lipped Channel Section Columns Undergoing Local-Overall Buckling Interaction

International Journal of Steel Structures, 21 (2), pp. 408-429.

Russell, M.J., Clifton, G.C., Lim, J.B.P. (2021), Vertical and horizontal push tests on specimens with a Trefoil decking profile, Structures, 29, pp. 1096-1110.

Roy, K., Ho Lau, H., Ting, T.C.H., Chen, B., Lim, J.B.P. (2021), Flexural behaviour of back-to-back built-up cold-formed steel channel beams: Experiments and finite element modelling, Structures, 29, pp. 235-253.

Feng, R., Huang, Z., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), Experimental study on material properties and stress concentration factors of stainless-steel hybrid tubular joints, Construction and Building Materials, 267, art. no. 121103,

Masood, R., Lim, J.B.P., González, V.A. (2021), Performance of the supply chains for New Zealand prefabricated house-building, Sustainable Cities and Society, 64, art. no. 102537,

Rajamony Laila, L., Gurupatham, B.G.A., Roy, K., Lim, J.B.P. (2021), Influence of super absorbent polymer on mechanical, rheological, durability, and microstructural properties of self-compacting concrete using non-biodegradable granite pulver, Structural Concrete, 22 (S1), pp. E1093-E1116.

Rajamony Laila, L., Gurupatham, B.G.A., Roy, K., Lim, J.B.P. (2021), Effect of super absorbent polymer on microstructural and mechanical properties of concrete blends using granite pulver, Structural Concrete, 21 (S1), pp. E898-E915.

2020

Feng, R., Liu, J., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), Numerical investigation and design rules for flexural capacities of H-section high-strength steel beams with and without web openings, Engineering Structures, 225, art. no. 111278,

Bahrebar, M., Lim, J.B.P., Clifton, G.C., Zirakian, T., Shahmohammadi, A., Hajsadeghi, M. (2020), Response assessment and prediction of low yield point steel plate shear walls with curved corrugated web plates and reduced beam sections, Structures, 28, pp. 1729-1745.

Feng, R., Tang, C., Roy, K., Chen, Z., Chen, B., Lim, J.B.P. (2020), An experimental study on stress concentration factors of stainless steel hybrid tubular K-joints, Thin-Walled Structures, 157, art. no. 107064,

Chen, B., Roy, K., Uzzaman, A., Lim, J.B.P. (2020), Moment capacity of cold-formed channel beams with edge-stiffened web holes, un-stiffened web holes and plain webs, Thin-Walled Structures, 157, art. no. 107070,

Feng, R., Mou, X., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), Finite-element modelling and design guidelines for axial compressive capacity of aluminium alloy circular hollow sections with holes, Thin-Walled Structures, 157, art. no. 107027,

Chen, B., Roy, K., Uzzaman, A., Raftery, G., Lim, J.B.P. (2020), Axial strength of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes and plain webs, Journal of Constructional Steel Research, 174, art. no. 106313,

Jing, J., Clifton, G.C., Roy, K., Lim, J.B.P. (2020), Three-storey modular steel building with a novel slider device: Shake table tests on a scaled down model and numerical investigation, Thin-Walled Structures, 155, art. no. 106932,

Feng, R., Wu, C., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), An experimental study on stainless steel hybrid tubular joints with square braces and circular chord, Thin-Walled Structures, 155, art. no. 106919,

Jing, J., Charles Clifton, G., Roy, K., Lim, J.B.P. (2020), Performance of a novel slider device in multi-storey cold-formed steel modular buildings under seismic loading, Structures, 27, pp. 212-246.

Taheri, H., Clifton, G.C., Dong, P., Karpenko, M., Raftery, G.M., Lim, J.B.P. (2020), The use of effective full penetration of T-butt welds in welded moment connections, Welding in the World, 64 (9), pp. 1503-1519.

Uzzaman, A., Lim, J.B.P., Nash, D., Roy, K. (2020), Web crippling behaviour of cold-formed steel channel sections with edge-stiffened and unstiffened circular holes under interior-two-flange loading condition, Thin-Walled Structures, 154, art. no. 106813,

Roy, K., Lau, H.H., Ting, T.C.H., Chen, B., Lim, J.B.P. (2020), Flexural capacity of gapped built-up cold-formed steel channel sections including web stiffeners, Journal of Constructional Steel Research, 172, art. no. 106154,

Chen, B., Roy, K., Uzzaman, A., Raftery, G.M., Lim, J.B.P. (2020), Parametric study and simplified design equations for cold-formed steel channels with edge-stiffened holes under axial compression, Journal of Constructional Steel Research, 172, art. no. 106161,

Jing, J., Clifton, G.C., Roy, K., Lim, J.B.P. (2020), Seismic protection of modular buildings with bonded rubber unit sliders: Experimental study, Thin-Walled Structures, 154, art. no. 106790,

Phan, D.T., Mojtabaei, S.M., Hajirasouliha, I., Lau, T.L., Lim, J.B.P. (2020), Design and Optimization of Cold-Formed Steel Sections in Bolted Moment Connections Considering Bimoment, Journal of Structural Engineering (United States), 146 (8), art. no. 04020153,

Lawson, R.M., Way, A.G.J., Heywood, M., Lim, J.B.P., Johnston, R., Roy, K. (2020), Stability of light steel walls in compression with plasterboards on one or both sides, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 173 (6), pp. 394-412.

Feng, R., Huang, Z., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), Finite-element analysis and design of stainless-steel CHS-to-SHS hybrid tubular joints under axial compression, Thin-Walled Structures, 151, art. no. 106728,

Feng, R., Chen, Z., Shen, C., Roy, K., Chen, B., Lim, J.B.P. (2020), Flexural capacity of perforated aluminium CHS tubes–An experimental study, Structures, 25, pp. 463-480.

Paya-Marin, M.A., Roy, K., Chen, J.-F., Masood, R., Lawson, R.M., Gupta, B.S., Lim, J.B.P. (2020), Large-scale experiment of a novel non-domestic building using BPSC systems for energy saving, Renewable Energy, 152, pp. 799-811.

Maguire, J.R., Teh, L.H., Clifton, G.C., Tang, Z.H., Lim, J.B.P. (2020), Cross-aisle seismic performance of selective storage racks, Journal of Constructional Steel Research, 168, art. no. 105999,

Phan, D.T., Mojtabaei, S.M., Hajirasouliha, I., Ye, J., Lim, J.B.P. (2020), Coupled element and structural level optimisation framework for cold-formed steel frames, Journal of Constructional Steel Research, 168, art. no. 105867,

Russell, M.J., Lim, J.B.P., Roy, K., Clifton, G.C., Ingham, J.M. (2020), Welded steel beam with novel cross-section and web openings subject to concentrated flange loading, Structures, 24, pp. 580-599.

Bahrebar, M., Lim, J.B.P., Clifton, G.C., Zirakian, T., Shahmohammadi, A., Hajsadeghi, M. (2020), Perforated steel plate shear walls with curved corrugated webs under cyclic loading, Structures, 24, pp. 600-609.

Wang, F., Yang, J., Lim, J.B.P. (2020), Pseudo-plastic Collapse Performance of Multi-span Continuous Beams with CFS Sigma Sections: A Numerical Study, International Journal of Steel Structures, 20 (2), pp. 600-611.

Rezaeian, H., Clifton, G.C., MacRae, G.A., Lim, J.B.P. (2020), In-plane cyclic behaviour of composite floor slab diaphragm interfaces under high-shear demand, Journal of Constructional Steel Research, 167, art. no. 105838,

Meng, F.-Q., Zhu, M.-C., Clifton, G.C., Ukanwa, K.U., Lim, J.B.P. (2020), Performance of square steel-reinforced concrete-filled steel tubular columns subject to non-uniform fire, Journal of Constructional Steel Research, 166, art. no. 105909,

Dar, M.A., Subramanian, N., Atif, M., Dar, A.R., Anbarasu, M., Lim, J.B.P. (2020), Efficient cross-sectional profiling of built up CFS beams for improved flexural performance, Steel and Composite Structures, 34 (3), pp. 333-345.

McCrum, D.P., Simon, J., Grimes, M., Broderick, B.M., Wrzesien, A., Lim, J.B.P. (2020), Hybrid seismic testing of cold-formed steel moment-resisting frames, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 173 (2), pp. 88-98.

Uzzaman, A., Lim, J.B.P., Nash, D., Roy, K. (2020), Cold-formed steel channel sections under end-two-flange loading condition: Design for edge-stiffened holes, unstiffened holes and plain webs, Thin-Walled Structures, 147, art. no. 106532,

Lowe, D., Roy, K., Das, R., Clifton, C.G., Lim, J.B.P. (2020), Full scale experiments on splitting behaviour of concrete slabs in steel concrete composite beams with shear stud connection, Structures, 23, pp. 126-138.

Adil Dar, M., Subramanian, N., Dar, D.A., Dar, A.R., Anbarasu, M., Lim, J.B.P., Mahjoubi, S. (2020), Flexural Strength of cold-formed steel built-up composite beams with rectangular compression flanges, Steel and Composite Structures, 34 (2), pp. 171-188.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2020), Numerical investigation and parametric study on the behaviour of axially loaded back-to-back gapped built-up cold-formed steel channels, Proceedings of the 9th International Conference on Advances in Steel Structures, ICASS 2018

Pourmasoud, M.M., Lim, J.B.P., Hajirasouliha, I., McCrum, D. (2020), Multi-Directional Base Isolation System for Coupled Horizontal and Vertical Seismic Excitations, Journal of Earthquake Engineering,

Rezaeian, H., Clifton, G.C., Lim, J.B.P. (2020), Failure modes for composite steel deck diaphragms subjected to in-plane shear forces – A review, (2020) Engineering Failure Analysis, 107, art. no. 104199.

2019

Mathieson, C., Roy, K., Charles Clifton, G., Ahmadi, A., Lim, J.B.P. (2019), Failure mechanism and bearing capacity of cold-formed steel trusses with HRC connectors, Engineering Structures, 201, art. no. 109741,

Roy, K., Lau, H.H., Huon Ting, T.C., Masood, R., Kumar, A., Lim, J.B.P. (2019), Experiments and finite element modelling of screw pattern of self-drilling screw connections for high strength cold-formed steel, Thin-Walled Structures, 145, art. no. 106393,

Beulah Gnana Ananthi, G., Roy, K., Chen, B., Lim, J.B.P. (2019), Testing, simulation and design of back-to-back built-up cold-formed steel unequal angle sections under axial compression, Steel and Composite Structures, 33 (4), pp. 595-614.

Rezaeian, H., Clifton, G.C., MacRae, G.A., Hogan, L., Lim, J.B.P. (2019), In-plane behaviour of composite floor slab diaphragm interfaces under high shear demand, Journal of Constructional Steel Research, 162, art. no. 105715,

Chen, B., Roy, K., Uzzaman, A., Raftery, G.M., Nash, D., Clifton, G.C., Pouladi, P., Lim, J.B.P. (2019), Effects of edge-stiffened web openings on the behaviour of cold-formed steel channel sections under compression, Thin-Walled Structures, 144, art. no. 106307,

Dar, M.A., Subramanian, N., Rather, A.I., Dar, A.R., Lim, J.B.P., Anbarasu, M., Roy, K. (2019), Effect of angle stiffeners on the flexural strength and stiffness of cold-formed steel beams, Steel and Composite Structures, 33 (2), pp. 225-243.

Roy, K., Lau, H.H., Lim, J.B.P. (2019), Finite element modelling of back back-to-back built built-up cold cold-formed stainless-steel lipped channels under axial compression, Steel and Composite Structures, 33 (1), pp. 869-898.

Ramaswami, G., Susnjak, T., Mathrani, A., Lim, J., Garcia, P. (2019), Using educational data mining techniques to increase the prediction accuracy of student academic performance, Information and Learning Science, 120 (7-8), pp. 451-467.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019), Experimental and numerical investigations on the axial capacity of cold-formed steel built-up box sections, Journal of Constructional Steel Research, 160, pp. 411-427.

Roy, K., Lim, J.B.P., Lau, H.H., Yong, P.M., Clifton, G.C., Wrzesien, A., Mei, C.C. (2019), Collapse behaviour of a fire engineering designed single-storey cold- formed steel building in severe fires, Thin-Walled Structures, 142, pp. 340-357.

Pouladi, P., Ronaldson, J., Clifton, G.C., Ingham, J.M., Wrzesien, A.M., Lim, J.B.P. (2019), Finite-element assisted design of eaves joint of cold-formed steel portal frames having single channel-sections, Structures, 20, pp. 452-464.

Maguire, J.R., Teh, L.H., Clifton, G.C., Lim, J.B.P. (2019), Residual capacity of cold-formed steel rack uprights following stomping during rocking, Journal of Constructional Steel Research, 159, pp. 189-197.

Roy, K., Lim, J.B.P. (2019), Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression, Structures, 20, pp. 42-73.

Roy, K., Lau, H.H., Lim, J.B.P. (2019), Numerical investigations on the axial capacity of back-to-back gapped built-up cold-formed stainless steel channels, Advances in Structural Engineering, 22 (10), pp. 2289-2310.

van Thienen, M., Lim, J.B.P., Behrouzi, A., Garcia, P., Banker-Hix, W. (2019), E-learning tools to facilitate instruction of a large enrollment structural engineering course, ASEE Annual Conference and Exposition, Conference Proceedings,

Mathison, C., Roy, K., Charles Clifton, G., Ahmadi, A., Masood, R., Lim, J.B.P. (2019), Novel pin jointed moment connection for cold-formed steel trusses, Steel and Composite Structures, 31 (5), pp. 453-467.

Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2019), Web crippling strength of perforated cold-formed ferritic stainless steel unlipped channels with restrained flanges under one-flange loadings, Thin-Walled Structures, 137, pp. 94-105.

McCrum, D.P., Simon, J., Grimes, M., Broderick, B.M., Lim, J.B.P., Wrzesien, A.M. (2019), Experimental cyclic performance of cold-formed steel bolted moment resisting frames, Engineering Structures, 181, pp. 1-14.

Roy, K., Ting, T.C.H., Lau, H.H., Bhatnagar, S., Lim, J.B.P. (2019), Finite element modeling of back-to-back built-up cfs un-lipped channels under axial compression, Materials Science Forum, 969 MSF, pp. 819-827.

Masood, R., Gonzalez, V., Lim, J.B.P., Cabrera, G. (2019), Trends in housing offsite manufacturing supply chain management (HOSCM) research, Proceedings of 22nd International Conference on Advancement of Construction Management and Real Estate, CRIOCM 2017, pp. 763-771.

Beulah Gnana Ananthi, G., Roy, K., Lim, J.B.P. (2019), Experimental and numerical investigations on axial strength of back-to-back built-up cold-formed steel angle columns, Steel and Composite Structures, 31 (6), pp. 601-615.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019), Experimental Investigation into the Behaviour of CFS Built-Up Channels Subjected to Axial Compression, Lecture Notes in Civil Engineering, 34, pp. 89-105.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019), Finite Element Modelling of Built-Up CFS Channel Columns Under Axial Load, Lecture Notes in Civil Engineering, 34, pp. 65-87.

Roy, K., Mohammadjani, C., Lim, J.B.P. (2019), Experimental and numerical investigation into the behaviour of face-to-face built-up cold-formed steel channel sections under compression, Thin-Walled Structures, 134, pp. 291-309.

Dar, M.A., Subramanian, N., Dar, A.R., Anbarasu, M., Lim, J.B.P., Atif, M. (2019), Behaviour of partly stiffened cold-formed steel built-up beams: Experimental investigation and numerical validation, Advances in Structural Engineering, 22 (1), pp. 172-186.

Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2019), Web crippling design of cold-formed ferritic stainless steel unlipped channels with fastened flanges under end-two-flange loading condition, Journal of Constructional Steel Research, 152, pp. 12-28.

2018

Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2018), Cold-formed ferritic stainless steel unlipped channels with web perforations subject to web crippling under one-flange loadings, Construction and Building Materials, 191, pp. 713-725.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Effect of thickness on the behaviour of axially loaded back-to-back cold-formed steel built-up channel sections - Experimental and numerical investigation, Structures, 16, pp. 327-346.

Ukanwa, K.U., Clifton, G.C., Lim, J.B.P., Hicks, S.J., Sharma, U., Abu, A. (2018), Design of a continuous concrete filled steel tubular column in fire, Thin-Walled Structures, 131, pp. 192-204.Yousefi, A.M., Lim, J.B.P., Charles Clifton, G.

Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2018), Web Crippling Behavior of Unlipped Cold-Formed Ferritic Stainless Steel Channels Subject to One-Flange Loadings, Journal of Structural Engineering (United States), 144 (8), art. no. 04018105,

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Nonlinear behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression, Journal of Constructional Steel Research, 147, pp. 257-276.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections, Steel and Composite Structures, 28 (2), pp. 233-250.

Adil Dar, M., Subramanian, N., Anbarasu, M., Dar, A.R., Lim, J.B.P. (2018), Structural performance of cold-formed steel composite beams, Steel and Composite Structures, 27 (5), pp. 545-554.

Lu, L., Xu, Y., Liu, J., Lim, J.B.P. (2018), Cyclic performance and design recommendations of a novel weak-axis reduced beam section connection, Steel and Composite Structures, 27 (3), pp. 337-353

Ye, J., Becque, J., Hajirasouliha, I., Mojtabaei, S.M., Lim, J.B.P. (2018), Development of optimum cold-formed steel sections for maximum energy dissipation in uniaxial bending, Engineering Structures, 161, pp. 55-67.

Lu, L., Xu, Y., Zheng, H., Lim, J.B.P. (2018), Cyclic response and design procedure of a weak-axis cover-plate moment connection, Steel and Composite Structures, 26 (3), pp. 329-345.

Ting, T.C.H., Roy, K., Lau, H.H., Lim, J.B.P. (2018), Effect of screw spacing on behavior of axially loaded back-to-back cold-formed steel built-up channel sections, Advances in Structural Engineering, 21 (3), pp. 474-487.

Johnston, R.P.D., McGrath, T., Nanukuttan, S., Lim, J.B.P., Soutsos, M., Chiang, M.C., Masood, R., Rahman, M.A. (2018), Sustainability of Cold-formed Steel Portal Frames in Developing Countries in the Context of Life Cycle Assessment and Life Cycle Costs, Structures, 13, pp. 79-87.

Ukanwa, K.U., Clifton, G.C., Lim, J.B.P., Hicks, S.J., Sharma, U., Abu, A. (2018), Simple design procedure for concrete filled steel tubular columns in fire, Engineering Structures, 155, pp. 144-156.

Lu, L., Xu, Y., Lim, J.B.P. (2018), Mechanical performance of a new I-section weak-axis column bending connection, Steel and Composite Structures, 26 (1), pp. 31-44.

Nöldgen, M., Lim, J.B.P., Giebat, S. (2018), Virtual design of adaptive road-bridge-types in a comprehensive 5dbim assessment, Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, pp. 1754-1760.

Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2018), Web bearing capacity of cold-formed ferritic stainless steel unlipped channels with web perforations under the end-two-flange (ETF) loading, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 69-81.

Roy, K., Lim, J.B.P., Yousefi, A.M., Charles Clifton, G., Mahendran, M. (2018), Low fatigue response of crest-fixed cold-formed steel drape curved roof claddings, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 713-727.

Wrzesien, A.M., Lim, J.B.P., MacLeod, I.A., Lawson, R.M (2018), Stressed skin design of steel sheeting panels - Part 2: Shear panels with sheeting fixed on all 4 sides, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 763-783.

Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2018), Web crippling behaviour of cold-formed ferritic stainless steel unlipped channels under interior-one-flange and end-one-flange loadings, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 83-87.

Pouladi, P., Ronaldson, J., Clifton, G.C., Ingham, J.M., Wrzesien, A.M., Milewski, P., Lim, J.B.P. (2018), Finite element assisted design of the eaves joint of cold-formed steel portal frames using single channel-sections, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 529-543.

Van Thienen, M., Dimyadi, J., Lim, J.B.P., Charles Clifton, G. (2018), Critical design criteria for standard, truncated, and parallel chords cold-formed steel trusses, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 859-877.

Uzzaman, A., Lim, J.B.P., Nash, D., Yousefi, A.M., Young, B. (2018), Parametric studies and design recommendations of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 179-189.

Uzzaman, A., Lim, J.B.P., Nash, D., Yousefi, A.M., Young, B. (2018), Experimental and analytical studies of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 163-178.

Wrzesien, A.M., Lim, J.B.P., MacLeod, I.A., Lawson, R.M. (2018), Stressed skin design of steel sheeting panels - Part 1: Shear resistance and flexibility of screw lapped joints, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 745-761.

Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Behaviour and design of a continuous concrete-filled steel tubular column in fire for a multi-storey building, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017, pp. 323-331.

Giebat, S., Bach, A., Nöldgen, M., Lim, J. (2018), Parametric, adaptive design and analysis of standardized steel composite bridges IABSE Symposium, Nantes 2018: Tomorrow's Megastructures, pp. S5-103-S5-110.

Karami, Z., Raftery, G.M., Lim, J., Nicholson, C. (2018), Bond quality of one-component polyurethane bonded laminated timber exposed to wet climatic conditions, WCTE 2018 - World Conference on Timber Engineering,

Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Fire design of continuous concrete filled steel tubular column for a multi-storey building, Applications of Fire Engineering - Proceedings of the International Conference of Applications of Structural Fire Engineering, ASFE 2017, pp. 45-52.

Ukanwa, K.U., Clifton, C.G., Lim, J.B.P., Hicks, S., Sharma, U.K. (2018), Numerical analysis of plain and steel fiber reinforced concrete filled steel tubular slender column, Advanced Steel Construction, 14 (2), pp. 308-323.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Experimental investigation into the behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 283-297.

2017

Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Behaviour and design of a continuous concrete-filled steel tubular column in fire for a multi-storey building, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017, pp. 323-331.

Giebat, S., Bach, A., Nöldgen, M., Lim, J. (2018), Parametric, adaptive design and analysis of standardized steel composite bridges IABSE Symposium, Nantes 2018: Tomorrow's Megastructures, pp. S5-103-S5-110.

Karami, Z., Raftery, G.M., Lim, J., Nicholson, C. (2018), Bond quality of one-component polyurethane bonded laminated timber exposed to wet climatic conditions, WCTE 2018 - World Conference on Timber Engineering,

Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Fire design of continuous concrete filled steel tubular column for a multi-storey building, Applications of Fire Engineering - Proceedings of the International Conference of Applications of Structural Fire Engineering, ASFE 2017, pp. 45-52.

Ukanwa, K.U., Clifton, C.G., Lim, J.B.P., Hicks, S., Sharma, U.K. (2018), Numerical analysis of plain and steel fiber reinforced concrete filled steel tubular slender column, Advanced Steel Construction, 14 (2), pp. 308-323.

Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Experimental investigation into the behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 283-297.

Mohammadjani, C., Yousefi, A.M., Cai, S.Q., Clifton, G.C., Lim, J.B.P. (2017), Strength and stiffness of cold-formed steel portal frame joints using quasi-static finite element analysis, Steel and Composite Structures, 25 (6), pp. 727-734.

Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2017), Web bearing capacity of unlipped cold-formed ferritic stainless steel channels with perforated web subject to end-two-flange (ETF) loading, Engineering Structures, 152, pp. 804-818.

Ukanwa, K.U., Lim, J.B.P., Sharma, U.K., Hicks, S.J., Abu, A., Charles Clifton, G. (2017), Behaviour of continuous concrete filled steel tubular columns loaded eccentrically in fire, Journal of Constructional Steel Research, 139, pp. 280-287.

Yousefi, A.M., Uzzaman, A., Lim, J.B.P., Clifton, G.C., Young, B. (2017), Web crippling strength of cold-formed stainless-steel lipped channels with web perforations under end-two-flange loading, Advances in Structural Engineering, 20 (12), pp. 1845-1863.

Ukanwa, K.U., Sharma, U., Hicks, S.J., Abu, A., Lim, J.B.P., Clifton, G.C. (2017), Behaviour of continuous concrete filled steel tubular columns loaded concentrically in fire, Journal of Constructional Steel Research, 136, pp. 101-109.

Yousefi, A.M., Lim, J.B.P., Uzzaman, A., Lian, Y., Clifton, G.C., Young, B. (2017), Design of cold-formed stainless steel lipped channel sections with web openings subjected to web crippling under end-one-flange loading condition, Advances in Structural Engineering, 20 (7), pp. 1024-1045.

Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2017), Cold-formed ferritic stainless steel unlipped channels with web openings subjected to web crippling under interior-two-flange loading condition – Part I: Tests and finite element model validation, Thin-Walled Structures, 116, pp. 333-341.

Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2017), Cold-formed ferritic stainless steel unlipped channels with web openings subjected to web crippling under interior-two-flange loading condition – Part II: Parametric study and design equations, Thin-Walled Structures, 116, pp. 342-356.

Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Sha, W. (2017), Optimum design of cold-formed steel portal frame buildings including joint effects and secondary members, International Journal of Steel Structures, 17 (2), pp. 427-442.

Uzzaman, A., Lim, J.B.P., Nash, D., Young, B. (2017), Effects of edge-stiffened circular holes on the web crippling strength of cold-formed steel channel sections under one-flange loading conditions, Engineering Structures, 139, pp. 96-107.

Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2017), Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition – Part II: parametric study and proposed design equations, Thin-Walled Structures, 114, pp. 92-106.

Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2017), Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition-Part I: Experimental and numerical investigation, Thin-Walled Structures, 111, pp. 103-112.

Yousefi, A.M., Uzzaman, A., Lim, J.B.P., Clifton, G.C., Young, B. (2017), Numerical investigation of web crippling strength in cold-formed stainless steel lipped channels with web openings subjected to interior-two-flange loading condition, Steel and Composite Structures, 23 (3), pp. 363-383.

Masood, R., Gonzalez, V., Lim, J.B.P. (2017), Value stream mapping - A case study of cold-formed steel house framing for offsite manufacturing supply chain, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction, pp. 829-836.

2016

Zirakian, T., Hajsadeghi, M., Lim, J.B.P., Bahrebar, M. (2016), Structural performance of corrugated web steel coupling beams, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 169 (10), pp. 756-764.

Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2016), Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part II: Parametric study and proposed design equations, Thin-Walled Structures, 107, pp. 489-501.

Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2016), Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition – Part I: Tests and finite element analysis, Thin-Walled Structures, 107, pp. 443-452.

Bahrebar, M., Kabir, M.Z., Hajsadeghi, M., Zirakian, T., Lim, J.B.P. (2016), Structural performance of steel plate shear walls with trapezoidal corrugations and centrally-placed square perforations, International Journal of Steel Structures, 16 (3), pp. 845-855.

Uzzaman, A., Wrzesien, A.M., Lim, J.B.P., Hamilton, R., Nash, D. (2016), Design of Top-hat Purlins for Cold-formed Steel Portal Frames, Structures, 7, pp. 113-125.

Bahrebar, M., Kabir, M.Z., Zirakian, T., Hajsadeghi, M., Lim, J.B.P. (2016), Structural performance assessment of trapezoidally-corrugated and centrally-perforated steel plate shear walls, Journal of Constructional Steel Research, 122, pp. 584-594.

Ahmadi, A., Mathieson, C., Clifton, G.C., Das, R., Lim, J.B.P. (2016), An experimental study on a novel cold-formed steel connection for light gauge open channel steel trusses, Journal of Constructional Steel Research, 122, pp. 70-79.

Yousefi, A.M., Lim, J.B.P., Uzzaman, A., Lian, Y., Clifton, G.C., Young, B. (2016), Web crippling strength of cold-formed stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition, Steel and Composite Structures, 21 (3), pp. 629-659.

Lim, J.B.P., Wrzesien, A.M., Nethercot, D.A. (2016), Sustainable applications of cold-formed steel structures: Portal frames, Recent Trends in Cold-Formed Steel Construction, pp. 265-303.

Wrzesien, A.M., Phan, D.T., Lim, J.B.P., Lau, H.-H., Hajirasouliha, I., Tan, C.S. (2016), Effect of stressed-skin action on optimal design of cold-formed steel square and rectangular-shaped portal frame buildings, International Journal of Steel Structures, 16 (2), pp. 299-307.

McKinstray, R., Lim, J.B.P., Tanyimboh, T.T., Phan, D.T., Sha, W. (2016), Comparison of optimal designs of steel portal frames including topological asymmetry considering rolled, fabricated and tapered sections, Engineering Structures, 111, pp. 505-524.

Lim, J.B.P., Hancock, G.J., Charles Clifton, G., Pham, C.H., Das, R. (2016), DSM for ultimate strength of bolted moment-connections between cold-formed steel channel members, Journal of Constructional Steel Research, 117, pp. 196-203.

Mo, K.H., Alengaram, U.J., Jumaat, M.Z., Liu, M.Y.J., Lim, J. (2016), Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand, Journal of Cleaner Production, 112, pp. 763-770.

Johnston, R.P.D., Lim, J.B.P., Lau, H.H., Xu, Y., Sonebi, M., Armstrong, C.G., Mei, C.C. (2016), Finite-element investigation of cold-formed steel portal frames in fire, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 169 (1), pp. 3-19.

Ahmadi, A., Yee, C.K.L., Shepherd, H.J.S., Clifton, G.C., Das, R., Lim, J.B.P. (2016)

Behaviour of cold-formed steel trusses with concentric and eccentric joint arrangements using the Howick Rivet Connector, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2016 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 647-664.

Yousefi, A.M., Lim, J.B.P., Uzzaman, A., Lian, Y., Clifton, G.C., Young, B. (2016)

Web crippling strength of cold-formed duplex stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2016 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 313-324.

Ye, J., Hajirasouliha, I., Becque, J., Lim, J.B.P (2016), Optimisation of cold-formed steel sections for maximum energy dissipation capacity and strength, Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, SDSS 2016, pp. 435-442.

Foster, P., Abdelal, G., Lim, J.B.P., Hajsadeghi, M., McCrum, D. (2016), Finite element modelling of cyclic behaviour of cold-formed steel bolted moment-resisting connections, Journal of Construction in Developing Countries, 21 (1), pp. 167-180.

Mathieson, C., Clifton, G.C., Lim, J.B.P. (2016), Novel pin-jointed connection for cold-formed steel trusses, Journal of Constructional Steel Research, 116, pp. 173-182.

2015

Wrzesien, A.M., Lim, J.B.P., Xu, Y., MacLeod, I.A., Lawson, R.M. Effect of stressed skin action on the behaviour of cold-formed steel portal frames (2015) Engineering Structures, 105, pp. 123-136. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84944182816&doi=10.1016%2fj.engstruct.2015.09.026&partnerID=40&md5=45dd49ac4d1643ecca861c3b5a8c3127

Paya-Marin, M.A., Lim, J.B.P., Chen, J.-F., Lawson, R.M., Gupta, B.S. Large scale test of a novel back-pass non-perforated unglazed solar air collector (2015) Renewable Energy, 83, pp. 871-880. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84930966074&doi=10.1016%2fj.renene.2015.05.039&partnerID=40&md5=1bc7dc49bf9b6c34e9dce4671e21a676

Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Wrzesien, A.M., Sha, W., Lawson, R.M. Optimal design of cold-formed steel portal frames for stressed-skin action using genetic algorithm (2015) Engineering Structures, 93, pp. 36-49. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84925400638&doi=10.1016%2fj.engstruct.2015.02.037&partnerID=40&md5=784b2215e23065040e70fb5d6c80e2e2

Johnston, R.P.D., Sonebi, M., Lim, J.B.P., Armstrong, C.G., Wrzesien, A.M., Abdelal, G., Hu, Y. The collapse behaviour of cold-formed steel portal frames at elevated temperatures (2015) Journal of Structural Fire Engineering, 6 (2), pp. 77-101. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84944207089&doi=10.1260%2f2040-2317.6.2.77&partnerID=40&md5=57480e1d7178285300ff3919723cf30f

McKinstray, R., Lim, J.B.P., Tanyimboh, T.T., Phan, D.T., Sha, W., Brownlee, A.E.I. Topographical optimisation of single-storey non-domestic steel framed buildings using photovoltaic panels for net-zero carbon impact (2015) Building and Environment, 86, pp. 120-131. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84921363017&doi=10.1016%2fj.buildenv.2014.12.017&partnerID=40&md5=afb9360ee1cf4bd13cfc50e4967539ae

Lee, Y.H., Tan, C.S., Mohammad, S., Lim, J.B.P., Johnston, R. Numerical study of joint behaviour for top-seat flange cleat connection in cold-formed steel structures (2015) Scientia Iranica, 22 (4), pp. 1554-1566. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85013442782&partnerID=40&md5=ed96ae54cc1d51671734b910a23369cb

Yousefzadeh, S., Spillane, J.P., Lamont, L., McFadden, J., Lim, J.P.B. Building Information Modelling (BIM) software interoperability: A review of the construction sector (2015) Proceedings of the 31st Annual Association of Researchers in Construction Management Conference, ARCOM 2015, pp. 711-720. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84985990206&partnerID=40&md5=3fb41787e261a60e51b73b1cad649596

Stundon, D., Spillane, J., Lim, J.P.B., Tansey, P., Tracey, M. Building information modelling energy performance assessment on domestic dwellings: A comparative study (2015) Proceedings of the 31st Annual Association of Researchers in Construction Management Conference, ARCOM 2015, pp. 671-679. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84958262783&partnerID=40&md5=14ea10a25de980195ab741eb1e06cdd4

McKinstray, R., Lim, J.B.P., Tanyimboh, T.T., Phan, D.T., Sha, W. Optimal design of long-span steel portal frames using fabricated beams (2015) Journal of Constructional Steel Research, 104, pp. 104-114. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84908439341&doi=10.1016%2fj.jcsr.2014.10.010&partnerID=40&md5=8a1f81a2e5628d11be9ffc6434b03857

2014

Phan, D.T., Wrzesien, A.M., Lim, J.B.P., Hajirasouliha, I. Effect of stressed-skin action on optimal design of a cold-formed steel portal framing system (2014) 22nd International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 661-677. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84975745400&partnerID=40&md5=a7d0e550322659f430829686f589fac0

Mathieson, C.D., Clifton, G.C., Lim, J.B.P. Development of a novel pinned connection for cold-formed steel trusses (2014) 22nd International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 745-759. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84925965276&partnerID=40&md5=8e0bd815d1a192b3d0983a740355953e

Uzzaman, A., Wrzesien, A., Hamilton, R., Lim, J.B.P., Nash, D. Numerical investigation of cold-formed steel top-hat purlins (2014) 22nd International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 571-585. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84925962802&partnerID=40&md5=97d6afb789bc98ed14beb075229e4663

Lim, J.B.P., Hancock, G.J., Clifton, G.C., Pham, C.H. Direct strength method for ultimate strength of bolted moment-connections between cold-formed steel channel members (2014) 22nd International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 729-743. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84925953148&partnerID=40&md5=9694cc3aac5fb836880a385b68a637de

Wrzesien, A.M., Lim, J.B.P., Lawson, R.M. Effect of stressed-skin action on the behaviour of cold- formed steel portal frames (2014) 22nd International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 643-659. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84925936422&partnerID=40&md5=d048766df17ee7d3eb05941e6743f3c2

Johnston, R.P.D., Lim, J.B.P., Lau, H.H., Xu, Y., Sonebi, M., Armstrong, C.G., Switzer, C., Mei, C.C. Cold-formed steel portal frames in fire: Full-scale testing and finite element analysis (2014) Structural Engineer, 92 (10), pp. 44-50. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84907873040&partnerID=40&md5=f66fc28b02d7dc3238401defd87a09c1

2013

Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Sha, W. An efficient genetic algorithm for the design optimization of cold-formed steel portal frame buildings (2013) Steel and Composite Structures, 15 (5), pp. 519-538. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84890929927&doi=10.12989%2fscs.2013.15.5.519&partnerID=40&md5=202ace21050faf1f5f3d8b9b6280ccfb

Lawson, R.M., Lim, J.B.P., Popo-Ola, S.O. Pull-out forces in shear connectors in composite beams with large web openings (2013) Journal of Constructional Steel Research, 87, pp. 48-59. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84877931770&doi=10.1016%2fj.jcsr.2013.03.025&partnerID=40&md5=ee5a127eacf82987cfa645d414b135d9

Rahman, M., Xu, Y., Lim, J.B.P., Switzer, C., Hamilton, R., Comlekci, T., Pritchard, D. Behavior of steel portal frames in fire: Comparison of implicit and explicit dynamic finite element methods (2013) International Journal of Structural Stability and Dynamics, 13 (4), art. no. 250058, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-84875347423&doi=10.1142%2fS0219455412500587&partnerID=40&md5=8c299c8ec3e95a7ae95f838ca3c67822

Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Lawson, R.M., Xu, Y., Martin, S., Sha, W. Effect of serviceability limits on optimal design of steel portal frames (2013) Journal of Constructional Steel Research, 86, pp. 74-84. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84876394375&doi=10.1016%2fj.jcsr.2013.03.001&partnerID=40&md5=c8552bc869a4e5bfb523bab32977f199

Phan, D.T., Lim, J.B.P., Sha, W., Siew, C.Y.M., Tanyimboh, T.T., Issa, H.K., Mohammad, F.A. Design optimization of cold-formed steel portal frames taking into account the effect of building topology (2013) Engineering Optimization, 45 (4), pp. 415-433. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84876132175&doi=10.1080%2f0305215X.2012.678493&partnerID=40&md5=0ad753c9b1510355b1c66b49eac7e594

Paya-Marin, M.A., Lim, J.B.P., Sen Gupta, B., Lawson, R.M. Back-pass non-perforated unglazed solar collector: Performance and evaluation (2013) Renewable Energy and Power Quality Journal, 1 (11), art. no. 507, pp. 1000-1004. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073278777&doi=10.24084%2frepqj11.507&partnerID=40&md5=b748576302a241b8552b0e38318e5856

Uzzaman, A., Lim, J.B.P., Nash, D., Rhodes, J., Young, B. Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition (2013) Thin-Walled Structures, 65, pp. 34-48. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84874038770&doi=10.1016%2fj.tws.2012.12.003&partnerID=40&md5=b8e442a21f1eb246559f116687e06693

Uzzaman, A., Wrzesien, A.M., Hamilton, R., Lim, J.B.P., Nash, D. Investigation of cold-formed steel top-hat sections under bending (2013) Civil-Comp Proceedings, 102. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84893958640&partnerID=40&md5=a4d3bba2c56c4940352251624d10bd30

Phan, T.D., Lim, J.H., Lim, J.B.P., Sha, W., Tanyimboh, T.T., Dundu, M. Effect of serviceability limits on optimal design of steel portal frames (2013) Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013, pp. 2123-2128. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84889066926&doi=10.1201%2fb15963-383&partnerID=40&md5=d463c25126092f57a936ad6cbc1122ad

Dundu, M., Lim, J.Buckling of cold-formed lipped-channel stub columns (2013) Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013, pp. 1107-1111. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84889041366&doi=10.1201%2fb15963-201&partnerID=40&md5=375bd125c30d9274542dbf3c9a8877c5

Rahman, M., Lim, J.B.P., Xu, Y., Hamilton, R., Comlekci, T., Pritchard, D. Effect of column base strength on steel portal frames in fire (2013) Proceedings of the Institution of Civil Engineers: Structures and Buildings, 166 (4), pp. 197-216. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84878090917&doi=10.1680%2fstbu.11.00040&partnerID=40&md5=1b424e485e64c1dd2f4cf07722070851

2012

Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Sha, W. Advanced design optimization of cold-formed steel portal frame buildings (2012) 21st International Specialty Conference on Cold-Formed Steel Structures - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 485-497. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84873387781&partnerID=40&md5=4a1ea161cf95c7ac11cfc821a8cdc0ae

Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Sha, W. An efficient genetic algorithm for the design optimization of cold-formed steel portal frame buildings (2012) 21st International Specialty Conference on Cold-Formed Steel Structures - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 473-483. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84873367479&partnerID=40&md5=ec1b2908719eb115bcb7b454e466be31

Uzzaman, A., Lim, J.B.P., Nash, D., Rhodes, J., Young, B. The effects of web holes on web crippling strength of cold-formed steel channels under end-two-flange loading condition (2012) 21st International Specialty Conference on Cold-Formed Steel Structures - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 297-310. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84873351814&partnerID=40&md5=63b57c3c531f979eeb6ee12d7c53f388

Zhou, F., Lim, J.B.P., Young, B. Ultimate compressive strength of cold-formed steel angle struts loaded through a single bolt (2012) Advances in Structural Engineering, 15 (9), pp. 1583-1596. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84866942145&doi=10.1260%2f1369-4332.15.9.1583&partnerID=40&md5=c779b64cc48ee346166fa730c036fb68

Wrzesien, A., Lim, J.B.P., Nethercot, D. Optimum joint detail for a general cold-formed steel portal frame(2012) Advances in Structural Engineering, 15 (9), pp. 1623-1640. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84866933274&doi=10.1260%2f1369-4332.15.9.1623&partnerID=40&md5=1f2a53fc00748f56331852435acb970c

Uzzaman, A., Lim, J.B.P., Nash, D., Rhodes, J., Young, B. Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - Part II: Parametric study and proposed design equations (2012) Thin-Walled Structures, 56, pp. 79-87. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84859628317&doi=10.1016%2fj.tws.2012.03.009&partnerID=40&md5=dc2b634a3f269125eab0761667461260

Uzzaman, A., Lim, J.B.P., Nash, D., Rhodes, J., Young, B. Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - Part I: Tests and finite element analysis (2012) Thin-Walled Structures, 56, pp. 38-48. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84859483099&doi=10.1016%2fj.tws.2012.03.010&partnerID=40&md5=d15de35a9157f6c75ace6a39c634fbab

Cai, J., Lim, J., Feng, J., Xu, Y., Wang, K. Elastic catenary cable element considering frictional slip effect (2012) Science China Technological Sciences, 55 (6), pp. 1489-1495. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84862572099&doi=10.1007%2fs11431-012-4833-6&partnerID=40&md5=3178f848ced0a8307da2e907f79f8332

Uzzaman, A., Lim, J.B.P., Nash, D., Rhodes, J., Young, B. Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading (2012) Thin-Walled Structures, 50 (1), pp. 76-86. https://www.scopus.com/inward/record.uri?eid=2-s2.0-80054968943&doi=10.1016%2fj.tws.2011.09.009&partnerID=40&md5=eb2a3d87b72d7573e0649e8c24ff16a6

2011

Phan, D.T., Lim, J.B.P., Ming, C.S.Y., Tanyimboh, T., Issa, H., Sha, W. Optimization of cold-formed steel portal frame topography using real-coded genetic algorithm (2011) Procedia Engineering, 14, pp. 724-733. https://www.scopus.com/inward/record.uri?eid=2-s2.0-80054776252&doi=10.1016%2fj.proeng.2011.07.092&partnerID=40&md5=72483b3e3da952e811cab6e2c1976132

Early 2000s

Wrzesien, A.M., Lim, J.B.P., Lawson, R.M. Stressed skin action of the roof systems with hat-shaped purlins (2010) Shell Structures: Theory and Applications - Proceedings of the 9th SSTA Conference, pp. 339-342. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84903386005&doi=10.1201%2f9780203859766.ch77&partnerID=40&md5=8af46679255424396343de6eb16be8bb

Rahman, M., Lim, J.B.P., Hamilton, R., Comlekci, T., Pritchard, D., Xu, Y. Effect of rotational stiffness at column base of portal frame at elevated temperature (2009) ICASS '09/IJSSD - Proceedings of Sixth International Conference on Advances in Steel Structures and Progress in Structural Stability and Dynamics, pp. 818-825. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84867865574&partnerID=40&md5=af263119aecb30cf51fa0b39e13f1b69

Wrzesien, A.M., Lim, J.B.P., Lawson, R.M. The ultimate strength and stiffness of modern roof systems with hat-shaped purlins (2009) ICASS '09/IJSSD - Proceedings of Sixth International Conference on Advances in Steel Structures and Progress in Structural Stability and Dynamics, pp. 480-487. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84867855975&partnerID=40&md5=cec7792828a4f451d7cf8ffebfe2968a

Lim, J.B.P., Young, B. Effects of elevated temperatures on ultimate moment capacity of bolted moment-connections between cold-formed steel members (2008) 19th International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 547-561. https://www.scopus.com/inward/record.uri?eid=2-s2.0-77955836333&partnerID=40&md5=eb24ecf37967295246ed7fc6a9a1064d

Wrzesien, A.M., Lim, J.B.P. Cold-formed steel portal frame joints: A review (2008) 19th International Specialty Conference on Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 591-606. https://www.scopus.com/inward/record.uri?eid=2-s2.0-77955834086&partnerID=40&md5=86e830cdec526ff624901fa37560214a

Lim, J.B.P., Cosgrove, T.C., King, C.M., Nethercot, D.A. Effect of column base rotational stiffness on the strength of unbraced semi-rigid steel frames (2007) Proceedings of the 3rd International Conference on Steel and Composite Structures, ICSCS07 - Steel and Composite Structures, pp. 337-342. https://www.scopus.com/inward/record.uri?eid=2-s2.0-55549111234&partnerID=40&md5=7d5106639793438ed4af7a3eaba99114

Lim, J.B.P., Young, B. Effects of elevated temperatures on bolted moment-connections between cold-formed steel members (2007) Engineering Structures, 29 (10), pp. 2419-2427. https://www.scopus.com/inward/record.uri?eid=2-s2.0-34548362044&doi=10.1016%2fj.engstruct.2006.11.027&partnerID=40&md5=c9ce91b3a8898d1709417cef298a411f

Lim, J.B.P., Young, B., Feng, R. Ultimate bearing shear strength of cold-formed steel members using bolted connections at elevated temperatures (2007) 5th International Conference on Advances in Steel Structures, ICASS 2007, 3, pp. 718-725. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84858040427&partnerID=40&md5=f7b5b90d6c6ada7f1e1c4f9a65c44551

Lawson, R.M., Lim, J., Hicks, S.J., Simms, W.I. Design of composite asymmetric cellular beams and beams with large web openings (2006) Journal of Constructional Steel Research, 62 (6), pp. 614-629. https://www.scopus.com/inward/record.uri?eid=2-s2.0-32644432886&doi=10.1016%2fj.jcsr.2005.09.012&partnerID=40&md5=afb705226ff6e7df00704f086a33ff13

Lim, J.B.P., King, C.M., Rathbone, A.J., Davies, J.M., Edmondson, V. Eurocode 3 and the in-plane stability of portal frames (2005) Structural Engineer, 83 (21), pp. 43-49. https://www.scopus.com/inward/record.uri?eid=2-s2.0-27744575131&partnerID=40&md5=d2018da933e70bbecbb1202c36cebfea

Lim, J.B.P., Nethercot, D.A. Finite element idealization of a cold-formed steel portal frame (2004) Journal of Structural Engineering, 130 (1), pp. 78-94. https://www.scopus.com/inward/record.uri?eid=2-s2.0-13844271591&doi=10.1061%2f%28ASCE%290733-9445%282004%29130%3a1%2878%29&partnerID=40&md5=2d7b3622754b5e155e2b459228d36ba4

Lim, J.B.P., Nethercot, D.A. Stiffness prediction for bolted moment-connections between cold-formed steel members (2004) Journal of Constructional Steel Research, 60 (1), pp. 85-107. https://www.scopus.com/inward/record.uri?eid=2-s2.0-0142197618&doi=10.1016%2fS0143-974X%2803%2900105-6&partnerID=40&md5=8583b1da05efa353d29828988e6223a7

Lim, J.B.P., Nethercot, D.A. Ultimate strength of bolted moment-connections between cold-formed steel members (2003) Thin-Walled Structures, 41 (11), pp. 1019-1039. https://www.scopus.com/inward/record.uri?eid=2-s2.0-0141986526&doi=10.1016%2fS0263-8231%2803%2900045-4&partnerID=40&md5=72636bfb1f1b28fa1ddb770d31530a16

Lim, J.B.P., Nethercot, D.A. Evaluation of bolt-hole elongation stiffness for the stiffness prediction of cold-formed steel bolted moment-connections (2002) International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 709-729. https://www.scopus.com/inward/record.uri?eid=2-s2.0-3042552173&partnerID=40&md5=78c5781c07b211f83a33bbc583816bad

Lim, J.B.P., Nethercot, D.A. Design and development of a general cold-formed steel portal framing system (2002) Structural Engineer, 80 (21), pp. 31-40. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84946893837&partnerID=40&md5=abd089d89d9d7a41ca0f5f3bf38d2e71